Sansui AU-D607F Integrated Amplifier

500 €

Category: Amplifiers

Brand: Sansui


Fully tested, in perfect working order. Visual condition is shown in the pictures.

Form Integrated amplifier
<Power amplifier part>
Effective output 75W+75W (8 ohm, 10Hz – 20kHz, THD 0.005%)
75W+75W (8 ohm, 1kz, THD 0.003%)
THD (at the time of 10Hz – 20kHz, and an effective output) 0.005% or less
Cross modulation distortion (60Hz:7kHz=4:1, SMPTE) 0.008% or less
Output bandwidth (IHF, both channel operation, THD 0.02%) 5Hz – 70kHz
Dumping factor (new IHF, 20Hz – 20kHz) 100 (8ohms)
Frequency characteristic (1W) DC-300kHz+0 -3dB
SN ratio (A network) 110dB or more
Envelope distortion Below a limit of measurement
TIM distortion (the Sqwtooth method) Below a limit of measurement
Slew rate �}180v/microsec (8ohm)
Inside slew rate �}300v/microsec (8ohm)
Rise time 0.8microsec
<Preamplifier part>
Input sensitivity/input impedance (1kHz) Phono1, 2 man-month:2.5mV /, 47kohm
Phono1 MC: 250 microvolts/100 ohm
Tuner, AUX, Tape Play1, 2:250mV / 27kohm
Phono maximum permissible input (1kHz, THD 0.01%) MM:200mV
An Output voltage/impedance (1kHz) Tape Rec: 250mV (47kohm)/600ohm
THD Phono1, 2 man month: 0.005% or less (20Hz – 20kHz, 5V)
RIAA deflection (man month) 20Hz-20kHz�}0.2dB
SN ratio (A network) Phono1, 2 man month: 88dB or more
Phono1 MC: 70dB or more
Phono input conversion noise
(A network, a short circuit)
Phono1, 2 man-month:-140dBV
Phono1 MC:-142dBV
Channel separation Phono1, 2 man month: 60dB or more
Phono1 MC: 50dB or more
Tuner, AUX, Tape Play: 80dB or more
Tone control Bass: +6–8dB (50Hz)
Treble: �}6dB (10kHz)
Filter Low: 16Hz (-3dB, 6 dB/oct)
Audio muting -20dB
Power dissipation (Electrical Appliance and Material Control Law) 200W
Dimensions Width 445x height 163x depth of 403mm
Weight 12.4kg