Luxman L-550X Integrated Amplifier

1200 €

Category: Amplifiers

Brand: LUXMAN

Desciprition

Fully tested and working.

Form Integrated amplifier
Succession effective output 50W+50W (8 ohms, both channel simultaneous drive, 20Hz – 20kHz)
THD 0.008% or less (8 ohms-3dB, 20Hz – 20kHz)
Cross modulation distortion 0.008% or less (8 ohms-3dB, 60Hz:7kHz=4:1)
Input sensitivity Phono MM:2mV
Phono MC: 90 microvolts (direct to an equalizer part)
Tuner, DAD, Line: 150mV
main in:150mV
Input impedance Phono man month: 100 ohms, 50kohm, 100kohm
Phono MC: 40 ohms, 100ohm, 300ohm
Tuner, DAD, Line:40kohm
main in: 47kohm
SN ratio (IHF-A correction) Phono man month: 86dB or more (5mV input)
Phono MC: 80dB or more (250-microvolt input)
Tuner, DAD, Line: 105dB or more (input short-circuit)
main in: 105dB or more
Frequency characteristic Phono man month: Less than [ 20Hz-20kHz�}0.2dB ]
Phono MC: Less than [ 20Hz-20kHz�}0.2dB ]
Tuner, DAD, Line: 100kHz [ 10Hz – ]-less than 1dB
main in: 100kHz [ 10Hz – ]-less than 1dB
Tone control The maximum variation: �}9dB
The point curving [ low-pass ]: 55Hz, 77Hz, 110Hz, 155Hz, 220Hz, 310Hz, 440Hz, 620Hz, 880Hz
The point curving [ high region ]: 620Hz, 880Hz, 1.2kHz, 1.7kHz, 2.5kHz, 3.5kHz, 5kHz, 7kHz, 10kHz
Puri part output pre out:150mV
Attachment
Line phase sensor
Subsonic Filter (15Hz)
A high cut-off filter (9kHz)
Puri heating switchpoint
Warmup indicator
Phone straight switchpoint
Signaloff switchpoint
Linear equalizer
Thon Inn switchpoint
Recording switchpoint
Tapes monitor switch
Tapes dubbing
Speaker selector
Line front jack
Headset jack
Pre-main separation functionality
AC outlet switched: Three lines, max300W
unswitched: One line, max200W
Supply voltage AC100V, 50Hz/60Hz
Power consumption 310W (Electrical Appliance and Material Control Law)
Dimensions Width 453x height 174x depth of 470mm
Weight 20.0kg
Top